Table of Contents
Advertisement
Error
Number
Numeric data error
-120
An error was detected in a numeric parameter (including the
non-decimal numeric types). This error message is reported when the
B2200 cannot determine the more specific errors -121 through
-128.
Invalid character in number
-121
An invalid character for the parameter was received; for example, an
alphacharacter was received when the parameter type was decimal
numeric.
Exponent too large
-123
The magnitude of the exponent for a numeric parameter was larger
than 32000.
Too many digits
-124
The mantissa of a decimal numeric parameter contained more than
255 digits excluding leading zeros.
Numeric data not allowed
-128
Numeric data is not allowed in this position for this command.
Suffix not allowed
-138
A suffix was received after a numeric parameter. For the B2200, no
parameters have suffix.
Character data error
-140
An error was detected in a character parameter. This error message is
reported if the B2200 cannot determine the more specific errors
-141 through -148.
Invalid character data
-141
Either the character parameter contains an invalid character or the
particular element received is not valid for the command.
Character data too long
-144
The character parameter contains more than 12 characters.
Agilent B2200 User's Guide, Edition 2
Standard SCPI Error Messages
Error Message and Description
Error Messages
7-5
Advertisement
Table of Contents
