To Set Remote Display Mode; To Return To Local Mode - Agilent Technologies B2200A User Manual

To Set Remote Display Mode

This instruction enables or disables the data display in the GPIB remote condition.
See "RMT_DSPL" on page 3-33.
LCD
1. Press the key. The setup menu will be displayed on the LCD.
Menu
2. Move the cursor to RMT_DSPL, then press the
3. Move the cursor to LCD, then press the
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the key to make the setup effective, or press the
Enter
changing the setup.
LED matrix
1. Press the key. The setup menu will be displayed on the LCD.
Menu
2. Move the cursor to RMT_DSPL, then press the
3. Move the cursor to LED, then press the
4. Press the arrow keys to set the remote display mode ON or OFF.
5. Press the key to make the setup effective, or press the
Enter
changing the setup.

To Return to Local Mode

Press the key. If the front panel keys are locked, send the :SYST:KLC
Local
command from an external computer, then press the
Agilent B2200 User's Guide, Edition 2
Front Panel Operation
key.
Enter
key.
Enter
Exit
key.
Enter
key.
Enter
Exit
key.
Local
Operation
key to cancel
key to cancel
3-11