B2200 Card/Mode/Port Related Errors - Agilent Technologies B2200A User Manual

Error Messages
B2200 Specific Error Messages

B2200 Card/Mode/Port Related Errors

Error
Number
3000 Card0 initialization fail
The B2200 may be defective. Contact your nearest Agilent
Technologies service center.
3001 Card1 initialization fail
The B2200 or card installed in slot 1 of the B2200 may be defective.
3002 Card2 initialization fail
The B2200 or card installed in slot 2 of the B2200 may be defective.
3003 Card3 initialization fail
The B2200 or card installed in slot 3 of the B2200 may be defective.
3004 Card4 initialization fail
The B2200 or card installed in slot 4 of the B2200 may be defective.
3011 Bad couple port number
For the Input Port No. for the couple port, only 1, 3, 5, 7, or 9 are
allowed.
3012 Bad bias port number
For Input Port No. for Bias Port, only 1 to 10 are allowed.
3013 Cannot connect multiple channels in SROUTe mode
For the single connection rule, an input port can be connected to only
one output port, and an output port can be connected to only one
input port.
3014 Cannot directly specify Bias Port channel
Relays on the input bias port cannot be controlled directly when the
bias mode is ON.
7-12
Error Message and Description
Agilent B2200 User's Guide, Edition 2