[:Route]:Close:card; [:Route]:Close[:List] - Agilent Technologies B2200A User Manual

Syntax
Query response
Example
Syntax
Query response
SCPI Command Reference

[:ROUTe]:CLOSe:CARD?

[:ROUTe]:CLOSe:CARD?
This query command returns channel_list of all closed (connected) channels for the
specified card.
[:ROUTe]:CLOSe:CARD? card_number
Parameter
card_number
channel_list <newline><^END>
OUTPUT @Agb2200;":ROUT:OPEN:CARD ALL"
OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"
OUTPUT @Agb2200;":ROUT:CLOS:CARD? 1"
ENTER @Agb2200;A$
A$ will be @10101,10202. For channel_list, see "Switch Control" on page 4-5.

[:ROUTe]:CLOSe[:LIST]

This command connects the input ports to the output ports (channels) as specified in
channel_list. The query returns 0 or 1 for each channel specified by channel_list, in
same order as specified by channel_list.
For some modes (such as Single Route Mode, Couple Mode, Ground Mode, and
Bias Mode), more complex connections may occur.
[:ROUTe]:CLOSe[:LIST] (@channel_list)
[:ROUTe]:CLOSe[:LIST]? (@channel_list)
Parameter
channel_list
close_status{, close_status} <newline><^END>
1: closed
0: opened
5-34
Explanation
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Explanation
Channels to close or to check.
For channel_list, see "Switch Control" on page 4-5.
Agilent B2200 User's Guide, Edition 2