Syntax
Query response
Example
Syntax
Example
SCPI Command Reference
*TST?
*TST?
This query command executes an internal self-test, then returns the result. After this
command execution, the B2200 becomes same status as after *RST command
execution.
*TST?
test_result <newline><^END>
test_result
0
1
OUTPUT @Agb2200;"*TST?"
ENTER @Agb2200;A
*WAI
This command stops execution of any commands until the Operation Complete
(OPC) bit is set to 1, which means there is no pending operation. See *OPC
command.
*WAI
OUTPUT @Agb2200;"*WAI"
5-12
Explanation
pass
fail
Agilent B2200 User's Guide, Edition 2