Use; Information On Use - Otto Bock Lisa HR32130000 Instructions For Use Manual

Use

4) Align the foot support bars so that the foot support can be joined together with the remaining foot support bar
(see fig. 7).
5) Fold down the foot support.
6) Put the foot support's notch onto the holder on the foot support bar (see fig. 8).
7) Turn the twistlock a quarter of a turn so that the bolt can engage in the foot support (see fig. 9).
NOTICE! Make sure the foot support has securely locked by giving it a short tug.
8) Firmly tighten the clamping screws (see fig. 6, item 2).
INFORMATION: Before tightening the screw connections, make sure that the foot support bars are at
the same height.
Everyday use
1) If necessary: Fold the pivot bearings to the front. To do so, pull the pivot bearings up (see fig. 6, item 1) and
turn them to the front. Allow the pivot bearings to engage downward into place.
2) Fold down the foot support.
3) Put the foot support's notch onto the holder on the remaining foot support bar (see fig. 8).
4) Turn the twistlock a quarter of a turn so that the bolt can engage in the foot support (see fig. 9).
NOTICE! Make sure the foot support has securely locked by giving it a short tug.
6
8
6 Use

6.1 Information on use

CAUTION
Lack of driving experience
Tipping over, falling due to errors in handling the product
► Practise on level, open ground first.
► Learn with the support of an assistant how the product reacts to changes in centre of gravity, e.g. downward
or upward slopes, inclines or when overcoming obstacles.
48
7
9
Lisa