Backpack; Disassembly And Transport; Folding - Otto Bock Lisa HR32130000 Instructions For Use Manual

Use
65

6.4.15 Backpack

CAUTION
Improper installation/use of the backpack
Falling of the user due to incorrect installation, damage to the product
► Always mount the backpack such that the stability of the product is maintained.
► Please note that the maximum load of the overall product must not be exceeded after attaching the backpack
as well (see Page 72).
1) Hang the top attachment loops of the backpack over the back tubes (see fig. 67, item 1).
2) Open the bottom attachment loops of the backpack and guide them around the tube of the folding scissor
mechanism at the indicated position (see fig. 67, item 2).
3) Close the attachment loops.
4) Make sure that the backpack is up against the back support without hanging down. Set the attachment loops to
a correspondingly short length to ensure this if necessary.
67

6.5 Disassembly and transport

6.5.1 Folding

CAUTION
Holding the product incorrectly while folding and unfolding it
Pinching, crushing due to lack of caution in danger areas
► Hold the product only by the described parts.
► Never reach into the folding scissor mechanism.
► Avoid pinching on the frame components.
66
66
Lisa