Related Manuals for Otto Bock C-Soft Plus 1.10 4X440-V1.10
Summary of Contents for Otto Bock C-Soft Plus 1.10 4X440-V1.10
- Page 1 C-Soft Plus 1.10 4X440=V1.10 Instructions for use (qualified personnel) ................
-
Page 3: Table Of Contents
Table of contents Foreword ......................... Product description ....................... Function ......................Combination possibilities ..................Intended use ........................Indications for use ....................Conditions of use ....................Contraindications ....................Qualification ......................Safety ..........................Explanation of warning symbols ................Structure of the safety instructions ................ -
Page 4: Foreword
1 Foreword INFORMATION Date of last update: 2021-12-21 Please read this document carefully before using the product and observe the safety ► notices. Please contact the manufacturer if you have questions about the product or in case of prob ► lems. -
Page 5: Safety
4 Safety 4.1 Explanation of warning symbols Warning regarding possible serious risks of accident or injury. WARNING Warning regarding possible risks of accident or injury. CAUTION Warning regarding possible technical damage. NOTICE 4.2 Structure of the safety instructions WARNING The heading describes the source and/or the type of hazard The introduction describes the consequences in case of failure to observe the safety instruc... -
Page 6: Scope Of Delivery
If you want to make only temporary changes to the settings while connected to the adjust ► ment software, you must reverse these changes before disconnecting the adjustment soft ware. You must also ensure the patient does not leave the range of the Bluetooth connection if set tings have been changed temporarily. -
Page 7: System Requirements
6 System Requirements 6.1 Minimum PC Hardware Requirements The minimum hardware requirements for installation/use of the adjustment software apply inde pendently of the operating system being used. If the minimum requirements for using the operat ing system are higher than the hardware requirements described here, the minimum requirements for the operating system apply. -
Page 8: Continue Installation Without Registration
• It is recommended that you do not run any other programs during installation and use of the adjustment software, since this can affect performance. • You must have administrator rights to install the software. Carrying out the installation 1) Start Microsoft Windows. 2) If necessary, poke the USB data carrier out from the card. -
Page 9: Continue Installation With Registration
Once installation is complete, an icon for starting the Ottobock Data Station is added to the Windows desktop. The "C-Soft Plus" software can be accessed after the Ottobock Data Station has been started. The Ottobock Data Station is a superordinate software platform used to launch the corresponding programs. -
Page 10: Data Transfer Between The Prosthesis And Pc
1. Click the "Print" button to make a printed copy. 2. Send the printout by fax to the following address: (+43-1) 526 79 85 • Otto Bock Healthcare Products GmbH • Brehmstraße 16 • 1110 Vienna • Austria. Follow the subsequent instructions of the installation wizard. -
Page 11: Starting The Program
9 Starting the Program INFORMATION To run the software, ensure that the user is logged on to the PC with at least standard user rights. • Double-click the icon (Ottobock Data Station) on the desktop. The program starts. • After the Ottobock Data Station has been started the first step is to create a new patient record (click the "Add Patient"... -
Page 12: Closing The Program
• Next, the screen for establishing the connection to the pros thesis appears. Information: The tube adapter configuration tool can be used without a connection to the prosthesis by clicking the symbol. • Click the "Connect" button to establish a connection with the prosthesis. -
Page 13: Troubleshooting
→ The window opens with the versions of the previously installed programs and the manu facturer's address. 2) Click the "Check for updates" button in this window. → A search for updates of previously installed software products and components is per formed via the Internet. -
Page 14: Ce Conformity
Pentium, Intel and Intel Core are registered trademarks of Intel Corporation. 15 CE conformity Otto Bock Healthcare Products GmbH hereby declares that the product is in compliance with applicable European requirements for medical devices. The full text of the regulations and requirements is available at the following Internet address: http://www.ottobock.com/conformity... - Page 15 1.5 Third-party software is provided without warranty “as is”. Ottobock does not provide any warranty of any kind (war ranty of merchantability, warranty of fitness for a particular purpose or warranty of non-infringement of rights) with respect to any third-party software. 2.
- Page 16 Otto Bock Healthcare Products GmbH Brehmstraße 16 · 1110 Wien · Austria T +43-1 523 37 86 · F +43-1 523 22 64 info.austria@ottobock.com · www.ottobock.com...
Need help?
Do you have a question about the C-Soft Plus 1.10 4X440-V1.10 and is the answer not in the manual?
Questions and answers