Camshafts Installation - Yamaha Apex RX10PA 2011 Supplementary Service Manual

CAMSHAFTS
INSTALLATION
1. Install:
• Exhaust camshaft
• Intake camshaft
TIP
Install the camshafts with the punch mark
facing up.
2. Install:
• Dowel pins
• Intake camshaft caps
• Exhaust camshaft caps
TIP
Make sure that the punch marks
camshafts are aligned with the arrow marks
on the camshaft caps.
Out of alignment → Reinstall.
3. Install:
• Camshaft cap bolts
Camshaft cap bolt:
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
TIP
Tighten the camshaft cap bolts in stages and
in a crisscross pattern, working from the inner
caps out.
NOTICE
The camshaft cap bolts must be tightened
evenly or damage to the cylinder head,
camshaft caps, and camshafts will result.
83
ENG
on the