Yamaha Apex RX10PA 2011 Supplementary Service Manual page 184

EXHAUST PIPE AND MUFFLER
3. Install:
• EXUP cable holder
TIP
• Align the projection
housing
cable holder.
• Temporarily tighten the EXUP valve housing
bolts
4. Tighten:
• EXUP valve housing bolts
5. Install:
• Exhaust pipe
• Frame protectors
TIP
Install the exhaust pipe to the brackets
the frame, making sure to position it as far
rearward as possible, and then temporarily
tighten the exhaust pipe bolts.
74
ENG
on the EXUP valve
with the hole
, do not torque them at this point.
EXUP valve housing bolt:
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
(temporarily)
Frame protector bolt:
16 Nm (1.6 m•kgf, 12 ft•lbf)
in the EXUP
on