Saving Or Recalling A Preset - Extron electronics CrossPoint 450 Plus Series Setup Manual

Front Panel Operation
The video selection button is labeled "RGBHV" on the
N
CrossPoint switchers and "Video" on the MAV Plus
switchers. The two labels are used interchangeably in this
manual.
Creating a Tie
1. Press and release the Esc button to clear any input button,
output button, or control button indicators that may be lit.
2. Press and release the Video and/or Audio I/O button(s) to
select or deselect video and/or audio as desired.
Green when selected.
Off when deselected.
N Audio or video can be broken away (tied by itself) by
selecting only the Video button or only the Audio button.
3. Press and release the desired input button.
The button lights to indicate the selection.
5
4. Press and release the desired output button(s).
Amber indicates RGBHV/video and audio tie.
Green indicates RGBHV/video only tie.
Red indicates audio only tie.
3
5. Press and release the Enter button. All button indicators
turn off.
3-2 CrossPoint / MAV Matrix Switchers • Front Panel Operation
Refer also to the CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus User's Manual at www.extron.com.
I / O
Red when selected.
RGBHV AUDIO
Off when deselected.
4 8
ENTER
Green indicates the
need to confirm the
change.

Saving or Recalling a Preset

1. Save a preset — Press and hold the Preset button until it
flashes.
Recall a preset — Press and release the Preset button.
Save a Press and hold.
PRESET
preset
2 seconds
Recall a Press and release.
PRESET
preset
• All input and output buttons with
assigned presets light red.
• The configuration data at assigned
preset locations will be overwritten.
1 2 3
17 18 19 20 21 22
2. Press and release the desired input or output button.
The button blinks red to indicate that
this preset is selected to save or recall.
1
ENTER
3. Press and release the Enter button.
CrossPoint / MAV Matrix Switchers • Front Panel Operation
Refer also to the CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus User's Manual at www.extron.com.
PRESET
Preset button blinks.
PRESET
Preset button lights.
4 5 6
The Enter button blinks
red to indicate the need to
activate the save or recall.
3-3