Changing The Heim Joint - Husqvarna FC 250 2017 Repair Manual

9 SHOCK ABSORBER, LINK FORK
9.32
88
R02761-10
R02764-10

Changing the heim joint

-
Remove shaft seal rings
@)
-
Press out bearing
-
Using a suitable tool, press in new bearing
-
Press in shaft seal rings @.
-
Mount bushing@.
-
Grease the shaft seal rings.
I
Long-life grease (a
-
Position the collar bushings
inward.
Finishing work
-
Install the link fork. (a p. 84)
-
Install the rear wheel. (8
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the shock absorber.
Main work
-
Clamp the shock absorber into the vise.
Guideline
I Use soft jaws.
-
Remove both collar bushings
cial tool.
I Drift (f 120) (0 p. 306)
fD
using a suitable tool.
using a suitable tool.
@).
p. 292)
0)
with the shoulder facing
p. 123)
(0 p. 12)
(8 p. 12)
(8 p. 59)
O
of the heim joint with a spe­
...