Husqvarna FC 250 2017 Repair Manual page 139

Note
Environmental hazard Hazardous substances cause environmental damage.
-
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Even when there is no load on the 12 V battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the 12 V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, and charging time are exceeded, the 12 V battery will be
destroyed.
If the 12 V battery is depleted from starting the vehicle repeatedly, the battery must be charged immedi­
ately.
If the 12 V battery is left in a discharged state for an extended period, it will become deeply discharged
and suffer a loss of capacity, destroying the battery.
The 12 V battery is maintenance-free.
311910-10
WIRING HARNESS, BATTERY 15
Preparatory work
-
Remove the air filter box cover.
-
Remove the seat. (0 p. 99)
-
Press and hold the kill switch � while the engine is idling until
the engine stops.
-
Disconnect the negative cable of the 12 V battery.
Main work
-
Connect the battery charger to the 12 V battery. Adjust the
battery charger.
EU battery charger
XCharge-professional
(IUI p. 294)
Alternative 1
EU battery charger
(00029095050) (IUI p. 294)
Alternative 2
US battery charger
(00029095051) (0 p. 295)
Alternative 3
UK battery charger
(00029095052) (0 p. 295)
Alternative 4
CH battery charger
(00029095053) (0 p. 295)
• Info
I
Follow the instructions of the charger and the manual.
-
Disconnect the battery charger after charging the 12 V bat­
tery.
(IUI p. 95)
(0
(00029095050)
XCharge-professional
XCharge-professional
XCharge-professional
XCharge-professional
p. 134)
137