Table of Contents
Advertisement
Bleeding and filling the dam�er
Info
Before working with the vacuum pump, carefully read the operating manual included with the vacuum
pump.
Open the adjusters of the rebound and compression damping completely.
SHOCK ABSORBER, LINK FORK 9
Alternative 2
Warning
Danger of accident
pension setting may seriously alter the handling
characteristic.
Extreme modifications to the suspension setting
may cause a serious deterioration in the handling
characteristic and overload components.
-
Only make adjustments within the recom
mended range.
-
Ride slowly to start with after making
adjustments to get the feel of the new
handling characteristic.
-
Position adjusting screws @, @, and
determined during disassembly.
Clamp the damper as shown.
I
Guideline
Use soft jaws.
•
Info
I
The filling port must be located at the highest position.
The piston rod moves in and out during filling; do not
immobilize it by holding it with your hand.
-
Remove the screw from the filling port.
O
-
Mount adapter
on the damper.
Info
Hand-tighten only without using a tool.
O
-
Connect adapter
to connector
I
Vacuum pump (T1240S)
Modifications to the sus
@)
in the location
8
of the vacuum pump.
(ll!:!I
p. 308)
...
77
Advertisement
Table of Contents
