Husqvarna FC 250 2017 Repair Manual page 80

9 SHOCK ABSORBER, LINK FORK
78
Adjust the control lever as shown.
✓ Control lever
Activate
✓ The suction process begins.
✓ Pressure gauge @ drops to the required value.
✓ Vacuum gauge
Determine distance
reservoir hole with the special tool.
I Depth micrometer (T107S)
✓ The floating piston is located in the lowermost position.
-I
e
_I
804379-10
When the vacuum gauge reaches the required value, turn
,-,
control lever
Guideline
14
mbar
✓ The pressure gauge increases to the required value.
When the pressure gauge reaches the specified value, turn
control lever
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the required value.
When the pressure gauge reaches the specified value, turn
control lever
Guideline
3 bar
✓ The pressure gauge drops to the required value.
External tank
C,
is set to
Damper Vacuum
set to
Vacuum.
switch (3.
On/Off
I < 0 bar
@)
drops to the required value.
14
mbar
G
between the floating piston and
(al p. 306)
0
Oil reservoir to Equalize pressure.
0 bar
C,
Damper to Pressure.
3 bar
C,
Damper to Vacuum.
0 bar
fD
is set to
Closed,
@)
and is
Oil reservoir