Table of Contents
Advertisement
10 EXHAUST SYSTEM
Warning
-
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
94
Changing the glass fiber am filling of the main silencer
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Not only is the noise level higher, the performance characteristic changes.
402618-10
Guideline
Remaining screws,
chassis
Finishing work
-
Install the right side cover.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
Main work
-
Remove all the screws on the main silencer.
O.
-
Take off silencer cap
-
Take off outer tube@.
-
Pull glass fiber yarn filling
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount new glass fiber yarn filling
8
-
Slide outer tube
over the glass fiber yarn filling.
O
-
Insert silencer cap
into the outer tube.
-
Mount and tighten all of the screws.
Guideline
Screws on main
silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
10 Nm (7.4 lbf ft)
M6
(8
p. 99)
(8
p. 99)
(8
p. 93)
(D
C,.
off of inner tube
(D
on the inner tube.
M5
7 Nm (5.2 lbf ft)
(8
p. 93)
(8
p. 99)
Advertisement
Table of Contents
