Disassembling The Damper - Husqvarna FC 250 2017 Repair Manual

9 SHOCK ABSORBER, LINK FORK
9.14
66
Disassemblin the damper
Remove the spring.
0.
Remove washer
Preparatory work
Remove the spring. (0 p. 65)
Main work
Make a note of the present state of rebound
pression damping @.
-
Open the adjusters of the rebound and compression damp­
ing completely.
@).
-
Slowly open screw
✓ The nitrogen pressure dissipates.
@)
Remove screw with the 0-ring.
8.
Remove locking cap
Press in seal ring retainer
Pressing tool (T1216) (!alp. 308)
O
and com­
0
using the special tool.