Table of Contents
Advertisement
Ad"ustin throttle cable la
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
HANDLEBAR,CONTROLS 7
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
-
Start the engine and let it run at idle speed. Move the handle
bar to and fro over the entire steering range.
I
The idle speed must not change.
If the idle speed changes:
-
Adjust throttle cable play.
Preparatory work
-
Remove the right side cover.
-
Remove the air filter box cover.
-
Remove the seat.
(0
p. 99)
-
Remove the fuel tank.
(0
-
Check throttle cable routing.
Main work
-
Move the handlebar to the straight-ahead position.
O.
-
Push back sleeve
-
Loosen nut@.
(D
-
Turn adjusting screw
8.
-
Loosen nut
(D
-
Push cold start button
0
-
Turn adjusting screw
to the basic position when the throttle grip is turned to the
front.
8.
-
Tighten nut
(D
-
Turn barrel adjuster
so that there is play in the throttle
cable at the throttle grip.
I
Guideline
Throttle cable play
8.
-
Tighten nut
O.
Slide on sleeve
-
Check the throttle grip for smooth operation.
Exhaust gases are toxic and
(0
p. 49)
(a
p. 99)
(a
p. 95)
p. 101)
(0
p. 48)
in as far as possible.
all the way to the stop.
so that the cold start button moves
I
3 ... 5 mm (0.12 ... 0.2 in)
49
Advertisement
Table of Contents
