Husqvarna FC 250 2017 Repair Manual page 53

HANDLEBAR,CONTROLS 7
-
Clean the outside of the handlebar and the inside of the grip
tube. Mount the grip tube on the handlebar.
-
Attach the throttle cables to the guide plate and route cor­
rectly.
-
Position half-shells@, mount and tighten screws
Guideline
I I
Screw, throttle grip
O
-
Slide on sleeve and check the throttle grip for ease of
movement.
Finishing work
-
Check throttle cable play.
8-
M6 I 5 Nm (3.7 lbf ft)
(0 p. 48)
..
51