Draining The Coolant; Refilling With Coolant - Husqvarna FC 250 2017 Repair Manual

19 WATER PUMP, COOLING SYSTEM
Warning
-
A
Warning
-
-
Warning
-
-
248

Draining the coolant

Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
Do not open the radiator, the radiator hoses or other cooling system components if the engine or
the cooling system are at operating temperature.
Allow the cooling system and the engine to cool down before you open the radiator, the radiator
hoses or other components of the cooling system.
In the event of scalding, rinse the area affected immediately with lukewarm water.
Danger of poisoning Coolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.

Refilling with coolant

Danger of poisoning Coolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Position the motorcycle upright.
Place an appropriate container under the water pump cover.
O.
Remove screw Take off radiator cap@.
-
Completely drain the coolant.
Mount and tighten screw
Guideline
Screw, water pump
cover
O
with a new seal ring.
M6 10 Nm (7.4 lbf ft)