Connecting System Cables - Cisco ASR 1000 Series Installation And Configuration Manual

Chapter 4 Cisco ASR 1006 Router Overview and Installation
Figure 4-20
1
2
Connect the adapter to your video terminal to complete the cable connection.
Step 3
Power on your video terminal.
Step 4
Step 5 Configure your video terminal to match the following default console port settings: 9600 baud, 8 data
bits, No parity generation or checking, 1 stop bit, and No flow control.
Step 6 Go to the

Connecting System Cables

Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1006 Router:
•
•
OL-13208-03
Cable-Management Bracket with Cabling in the Cisco ASR 1006 Router
AUXiliary connection
MGMT Ethernet port
"Connecting System Cables" section on page 4-29
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
Verify all cabling limitations (particularly distance) before powering on the system.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
SPA -4XO C3-P OS
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
4 3 2 1
3
BITS port
4 Cable-management U feature device
to continue the installation.

Connecting System Cables

SPA -4XO C3-P OS
OS
SPA -4XO C3-P
SPA -4XO C3-P OS
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
OS
SPA -4XO C3-P
4-29