C H A P T E R 4 Cisco Asr 1006 Router Overview And Installation - Cisco ASR 1000 Series Installation And Configuration Manual

Chapter 4 Cisco ASR 1006 Router Overview and Installation
Figure 4-2 Cisco ASR 1006 Router Rear View With AC Power Supply
5
4
1
2
3
4
Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable
operating temperature. (See
grounding lug is located on the side of the chassis. Two power supplies, either two AC power supplies
or two DC power supplies, are accessed from the rear of the router.
You have already unpacked your chassis and read all the site requirements for your new equipment.
Note
Proceed with the installation.
Do not combine AC and DC power supplies in the same chassis.
Note
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
OL-13208-03
6
100-240V~ 16-7A
50-60HZ
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
AC power supply fan
AC power supply DB-25 alarm connector—A
female DB-25 D-sub connector which enables
you to attach an external alarm monitoring
facility to the router, thus supporting a
telco-style of handling alarm conditions in the
router.
Cable tie wrap tabs
AC power supply captive screws
Figure
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
7
3
5
AC power supply handle
6 AC power inlet
7 AC power supply Standby switch (standby
symbol is a broken circle with a vertical line
through the top of it). A Standby switch is not
considered a disconnect.
8 AC power supply LEDs
4-2.) The fans are located at the rear of the chassis. A two-hole
Cisco ASR 1006 Router Description
8
OUTPUT INPUT INPUT
FAIL OK OK
ALARMS
60V
1A MAX
2 1
4-3