Verifying The Front Panel Leds; Verifying The Hardware Configuration; Checking Hardware And Software Compatibility; Configuring The Cisco Asr 1000 Series Routers At Startup - Cisco ASR 1000 Series Installation And Configuration Manual

Chapter 7 Cisco ASR 1000 Series Routers Power Up and Initial Configuration
*Feb 19 17:35:21.669: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded
from the Shell Manager
*Feb 19 17:35:22.221: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
Router>
Step 5 During the boot process, observe the system LEDs. The LEDs on the shared port adapter go on and off
in irregular sequence. They may go on, go out, and go on again for a short time. On the router, the green
STATUS LED comes on and stays on.

Verifying the Front Panel LEDs

The front-panel indicator LEDs provide power, activity, and status information useful during bootup. For
more detailed information about the LEDs, refer to
Components."

Verifying the Hardware Configuration

To display and verify the hardware features, enter the following commands:
•
•

Checking Hardware and Software Compatibility

To check the minimum software requirements of the Cisco IOS software with the hardware installed on
your Cisco ASR 1000 Series Routers, Cisco maintains the Software Advisor tool on Cisco.com. This
tool does not verify whether Cisco ASR 1000 Series SIPs or SPAs within a system are compatible; but
the tool provides the minimum Cisco IOS requirements for individual hardware modules and
components.
To access this tool, you must have a Cisco.com login account.
Note
To access the Software Advisor, click Login at Cisco.com, type Software Advisor in the search box,
and click Go. Click the link for the Software Advisor Tool.
Choose a product family or enter a specific product number to search for the minimum supported
software needed for your hardware.

Configuring the Cisco ASR 1000 Series Routers at Startup

This section explains how to create a basic running configuration for your Cisco ASR 1000 Series
Routers.
OL-13208-03
show version—Displays the system hardware version; the installed software version; the names and
sources of configuration files; the boot images; and the amount of installed DRAM, NVRAM, and
flash memory.
show diag slot—Displays the IDPROM information for the assemblies in the chassis.
Cisco ASR 1000 Series Aggregation Services Routers Installation and Initial Configuration Guide
Configuring the Cisco ASR 1000 Series Routers at Startup
Chapter 2, "Cisco ASR 1000 Series Routers
7-7