Cisco ASR 1000 Series Installation And Configuration Manual page 79

Chapter 3 Preparing Your Site for Installation
No user-serviceable parts inside Do not open. Statement 1040
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
To comply with the Class A emissions requirements shielded twisted pair T1/E1 cables must be used
Warning
for SPA-8-Port Channelized T1/E1 SPA (SPA-8XCHT1/E1) on the Cisco ASR1006, ASR1004, and ASR1002.
EN55022/CISPR22 Statement
Warning To comply with Class A emissions requirements- shielded management Ethernet, CON, and AUX
cables on the Cisco ASR1002 must be used.
Warning Power cable and AC adapter - When installing the product, please use the provided or designated
connection cables/power cables/AC adaptors. Using any other cables or adapters could cause a
malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of certified
cables (that have the 'UL' shown on the code) for any other electrical devices than products
designated by Cisco. The use of cables that are certified by Electrical Appliance and Material Safety
Law (that have 'PSE' shown on the code) is not limited to Cisco-designated products. Statement 371
Only trained and qualified personnel should be allowed to install or replace this equipment
Warning
Statement 1030
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
the protective device is rated not greater than: AC power supplies for the Cisco ASR 1004 Router, Cisco
ASR 1006 Router, and Cisco ASR 1002 Router: 120 VAC, 20A U.S. maximum. DC power supplies for the
Cisco ASR 1004 Router: 40A U.S. maximum. DC power supplies for the Cisco ASR 1006 Router: 50A U.S.
maximum. DC power supplies for the ASR 1002 Router: 30A U.S. maximum. Statement 1005
This product requires short-circuit (overcurrent) protection to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Warning This unit may have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device. Statement 1019
OL-13208-03
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
Standard Warning Statements
3-5