Cisco ASR 1002 Router Description
•
Note
The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly
and the power supply modules as field-replaceable units. The Cisco embedded ASR1000-SIP10 and
Cisco embedded ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the
shared port adapters in the SIP are field upgradable.
This section contains the following topics:
•
•
•
Front View
Figure 6-1
Figure 6-1
1
2
The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable
Note
and the Cisco ASR1000-RP1 is embedded in the chassis and not field upgradeable.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
6-2
A built- in 4x1GE Interface providing four SFP based GE connections, designated as SPA bay 0.
The built-in Gigabit Ethernet ports on the Cisco ASR1002 Router support the same small
form-factor pluggable (SFP) optical transceivers as the 5x1 GE SPA. For specific shared port
adapter SFP compatibility listings, go to Chapter 1 in:
http://cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR10
00/ASRspahw.pdf
(This does not include the Ethernet management port on the Cisco ASR1000-RP1.)
Front View, page 6-2
Rear View, page 6-3
Cisco ASR 1002 Router Components, page 6-4
shows the Cisco ASR 1002 Router with modules installed.
Cisco ASR 1002 Router —Front View
PWR
ACTV
STAT
STBY
ASR1000-ESP10
ASR 1002
STAT
QE0
QE1
QE2
QE3
pwr
min
stat
maj
crit
Embedded ASR1000-RP1 in the subslot and
represents the built in 4xGE SPA.
SPA subslot 2
Chapter 6
1
BOOT
LINK
PWR
STAT
SPA-4XOC3-POS
2
3
SPA subslot 1
4
SPA subslot 3
Cisco ASR 1002 Router Overview and Installation
3
SPA-4XOC3-POS
SPA-4XOC3-POS
4
OL-13208-03