How To Add And Total; How To Carry Out Manual Addition - Yamato DP-5601 Operation Manual

How to add and total

Use this function when you wish to add each measured value to the internal memory of the instrument
and confirm the total cycle or the total weight.

1. How to carry out manual addition

When a printer or other devices are connected to the system, refer to the respective instruction
manuals.
Operating procedure
Place an object to be weighed on
the platform of the instrument.
[Addition]
Press the key with the
object placed.
*To cancel the addition, press the
key.
Remove the object from the
instrument.
- One cycle of addition is now complete.
- By repeating Steps
Panel display
There is no change in the
indication.
If the parameter number 035 is set
to any numbers other than "0,"
"SEnd" appears for the preset
seconds.
to , each measurement value is added to the internal memory.
11
Remarks
The weight of the object
appears.
If the total value has
exceeded the storage
capacity of the internal
memory after addition,
the following error codes
appear.
- The number of
Measurement times
has exceeded.
- The total weight has
exceeded.
The display returns to
"0.00."