Table of Contents
Advertisement
Integrating Operation Time
The integrating operation time is a function to check the operation hours of unit. Its content can not be
changed.
1
Select the item in function menu
• Check that the power in turned on.
2
Check integrating operation time
Acc. time
Manual Defrost Operation
1
Select the item in function menu
Set TEMP
DEF Processing
FUNCTION
100hr
CANCEL
DEFROST
37.0℃↑
① Press the FUNCTION key. The function menu
starts and the Sub Display displays the items.
Select the item using the FUNCTION key.
① The integrating operation time from factory
shipment to now is displayed.
The integrating operation time indicates the total
sum of lapsed time in standby, operation start wait,
operation and operation end state.
② Press the CANCEL key to cancel the function
menu after checking the time.
① Press the DEFROST key to start the defrost
operation.
• The unit ends the defrost operation when the
defrost time (parameter) is up.
lamp blinks and "DEF Processing" is displayed
during the defrost operation.
• Press the DEFROST key again to suspend
defrosting.
Defrost operation is not available in the standby
state.
The default value of defrost operation is five
minutes.
45
Operation Method
The STANDBY
Advertisement
Table of Contents
