Table of Contents
Advertisement
Installation under Solaris™8/9 and Linux
FC controller LP 9002 / LP9802 / LP 8000
For settings, see ftp site: http://www.fibrecat.com oder ftp://raid@ftp.fujitsu-
siemens.com (passwort: 4jumbo17).
Note: In some cases Spheras does not run correctly on servers with the
Netscape Navigator installed by Solaris. As an alternative in these cases, use a
Windows client or a client from the following directory :
/usr/local/elSSM/bin/ssmClient; this will allow you to run Spheras on the host
without a special browser.
There are additional requirements if you are updating an existing installation or
making a new installation. These are:
1. You must stop or delete any previous Spheras agents present.
2. There should be no remnants of any previous installations on your computer.
3. You should check that there is at least 150 MB of free disk space in
/usr/local/.
Linux Server
The server must be linked over a fibre channel to the FibreCAT S80 unit(s).
Pentium III 400MHz
128MB RAM
150 MB free disk space under /usr/local/
SuSE Enterprise Server 7 - patch Update CD (including kernel patch 2.4.18)
Java Plugin 1.4.1-02
All Spheras agents must be stopped. Any previous installation must be
uninstalled.
Updating an existing installation
Checking for a previous installation
Use the command pkginfo -l elSSM to check if there is a previous version
installed on your system (Linux: rpm -q elSSM)
16
U41578-J-Z875-1-76
Advertisement
Table of Contents
