Chapter 8 Checking The Registry Information - Fujitsu ETERNUS DX Configuration Manual

Chapter 8
Checking the Registry Information
Check the value of the "TimeOutValue" registry key. If the "TimeOutValue" registry key does not exist, then
create it.
The registry file should be backed up before creating or changing any registry values.
1
Click the [Start] button, and then click [Run].
2
In the [Run] dialog box, type "regedit", and then click the [OK] button.
Registry Editor starts.
3
Follow the path described below:
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Disk
4
Check the value of the "TimeOutValue" registry key.
Check that the value of the "TimeOutValue" registry key is "0x3C". If the name or value is not "0x3C",
change it to "0x3C".
If the "TimeOutValue" key does not exist, add a registry key with the following values:
•
The "Name" field is case-sensitive.
•
Name
Type
Radix
Data
5
If any registry values were added or modified, reboot the server.
The modified settings will be enabled after the reboot.
TimeOutValue
REG_DWORD
Hexadecimal
3C
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
25
®
P3AM-3442-18ENZ0