The Reta-01 Ethernet Adapter Module - ABB RETA-01 User Manual

Ethernet adapter module

Hide thumbs Also See for RETA-01:

Table of Contents

The RETA-01 Ethernet Adapter module

The RETA-01 Ethernet Adapter module is an optional device for

ABB drives which enables the connection of the drive to a

Ethernet network. The drive is considered as a slave on the

Ethernet network. Through the RETA-01 Ethernet Adapter

module, it is possible to:

• give control commands to the drive

(Start, Stop, Run enable, etc.)

• feed a motor speed or torque reference to the drive

• give a process actual value or a process reference to the PID

controller of the drive

• read status information and actual values from the drive

• change drive parameter values

• reset a drive fault.

The Modbus/TCP and EtherNet/IP commands and services

supported by the RETA-01 Ethernet Adapter module are

discussed in chapter Communication. Please refer to the user

documentation of the drive as to which commands are supported

by the drive.

The adapter module is mounted into an option slot on the motor

control board of the drive. See the Hardware Manual of the drive

for module placement options.

Overview

Table of Contents