Appendix A – ABB IP configuration tool
for FMBT-21
Contents of this chapter
This chapter shows how to use the ABB IP configuration tool to:
•
find configured and unconfigured FMBT-21 adapter modules in the network
•
rewrite the IP configuration of the adapter modules.
Installation
The ABB IP configuration tool is part of the ABB Automation Builder software. No
separate installation is needed.
Finding adapter modules in the network
1.
Open the ABB IP configuration tool.
2.
Click the Scan button.
The FMBT-21 adapter modules present in the network appear on the results list.
Appendix A – ABB IP configuration tool for FMBT-21 73
13