74 Appendix A – ABB IP configuration tool for FMBT-21
Rewriting the IP configuration of adapter modules
1.
Scan the network for adapter modules.
For instructions, see section
2.
On the results list, click to select the adapter module whose IP configuration you
want to modify.
3.
Below New configuration, define the IP configuration settings according to your
network configuration.
4.
If you want the adapter module to use a static IP address instead of DHCP, clear
the DHCP check box.
5.
To apply the new settings, click the Send Configuration button.
The new current IP address and configured IP address appear on the results list.
Finding adapter modules in the network (page
73).