ABB FMBT-21 User Manual page 63

No. Name/Value
16 Reserved
...
26
27 FBA A/B par refresh
0 = Done
1 = Refresh
28 FBA A/B par table ver
29 FBA A/B drive type
code
30 FBA A/B mapping file
ver
Description
These parameters are not used by the adapter
module when using the NONE protocol.
Validates any changed adapter module configura-
tion parameter settings. After refreshing, the value
reverts automatically to 0 = Done.
Note: This parameter cannot be changed while the
drive is running.
Refreshing done
Refreshing
Read-only. Displays the parameter table revision
of the fieldbus adapter module mapping file stored
in the memory of the drive. In format xyz, where
x = major revision number
y = minor revision number
z = correction number
OR
in format axyz, where
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Parameter table revision
Read-only. Displays the drive type code of the
fieldbus adapter module mapping file stored in the
memory of the drive.
Drive type code of the fieldbus adapter module
mapping file
Read-only. Displays the fieldbus adapter module
mapping file revision stored in the memory of the
drive in decimal format.
Mapping file revision
NONE – Start-up 63
Default
N/A
0 = Done
N/A
N/A
N/A