•
read status information and actual values from the drive
•
reset a drive fault
•
read/write parameters of the drive
•
connect Drive composer pro tool.
The protocol used to access these functionalities over Ethernet is described in chapter
Modbus/TCP – Communication
The adapter module supports 10 Mbit/s and 100 Mbit/s data transfer rates and
automatically detects the data transfer rate used in the network.
The adapter module is installed into an option slot on the drive control unit. See the
drive manuals for module placement options.
FMBT-21 layout
■
No.
Description
1
Lock
2
Mounting screw (Grounding screw)
3
X1 connector to Ethernet (RJ-45)
4
X2 connector for chaining another module (RJ-45)
5
Diagnostic LEDs
6
MAC address
Overview of the Ethernet network and the FMBT-21 module 19
protocol.
2
3
1
6
4
5