Mechanical Installation; Contents Of This Chapter; Necessary Tools And Instructions; Unpacking And Examining The Delivery - ABB FMBT-21 User Manual

Mechanical installation

Contents of this chapter

This chapter contains a delivery checklist and instructions on installing the module.

Necessary tools and instructions

You will need a Torx TX10 screwdriver to secure the FMBT-21 adapter module to the
drive. See also the drive hardware manual.

Unpacking and examining the delivery

1. Open the option package.
2. Make sure that the package contains:
• Modbus/TCP adapter module, type FMBT-21
• quick guide.
3. Make sure that there are no signs of damage.

Before you start

The adapter module has a specific position in the drive. Plastic pins, a lock and one
screw hold the module in place. The screw also makes an electrical connection between
the module and drive frame for cable shield grounding.
Do not install the FMBT-21 module on the FEA-03 F-series extension adapter.
Do not install the FMBT-21 when the drive is powered up.
When the module is installed, it makes the signal and power connection to the drive
through a 20-pin connector.
Mechanical installation 21
4
10