Replacing The Air Filter - Beckman Coulter Avanti J-26XP Instructions For Use Manual

Care and Maintenance
Maintenance

Replacing the Air Filter

1
Check the air filter regularly and replace it about once a year, or more often if it looks dirty.
• The air filter is not fastened to the centrifuge, so no tools are required for removal or
installation.
2
To remove the air filter, hold the side edges and lift the filter straight up until the bottom edge
is above the centrifuge bottom retaining strip.
a. Pull the filter out, bottom edge first, and discard it.
3
Install a new filter (885218).
a. The filter has a directional arrow on one of its edges; install the filter with this arrow
pointing toward the centrifuge.
b. Holding the filter by the side edges, insert the top half behind the frame edge and lift up
until the bottom half clears the retaining strip.
c. Then set the bottom edge down.
5-4
1
2
3
1. Frame Edge
2. Air Filter
4
3. Retaining Strip
4. Frame Edge
J326XP-IM-5AB