Certification; Scope Of This Manual - Beckman Coulter Avanti J-26XP Instructions For Use Manual

Certification

To ensure full system quality, Beckman Coulter Avanti® J-26XP centrifuges are manufactured in a
registered ISO 9001 or 13485 facility. They have been designed and tested to be compliant (when
used with Beckman Coulter rotors) with the laboratory equipment requirements of applicable
regulatory agencies. Declarations of conformity and certificates of compliance are available at
www.beckmancoulter.com.

Scope of This Manual

This manual is designed to familiarize centrifuge users and site engineers with the Avant J-26XP
centrifuge, its functions, specifications, operation, and routine care and maintenance. We
recommend that you read this entire manual, especially the
information, before operating the instrument or performing instrument maintenance.
CHAPTER 1, Specifications and Preinstallation Requirements
•
instructions for preparing your site for centrifuge installation.
CHAPTER 2, Description
•
description of system controls and indicators.
CHAPTER 3, Operation
•
CHAPTER 4, Troubleshooting
•
and user-performed corrective actions.
CHAPTER 5, Care and Maintenance
•
brief list of supplies and replacement parts.
APPENDIX A
•
NOTE
If the centrifuge is used in a manner other than specified in this manual, the safety and performance
of this equipment could be impaired. Further, the use of any equipment other than that recommended
by Beckman Coulter has not been evaluated for safety. Use of any equipment not specifically
recommended in this manual is the sole responsibility of the user.
J326XP-IM-5AB
contains an overall description of the centrifuge, including a
summarizes procedures for operating the centrifuge.
lists system diagnostic messages, together with probable causes
contains procedures for routine maintenance, as well as a
contains a procedure to use when temperature control within ±1°C is required.
Introduction
and all safety-related
Safety Notice
contains system specifications and
xiii