Table of Contents
Advertisement
6.3.2.
Wireless zones
CPX220NWB is capable of storing information about up to 16 wirelles inputs number from 1
to 16.
Remove the front cover of the detector that you want to enroll to the control panel. It is
recommended to add wireless sensors individually. To prevent the accidental transmissions
from other detectors, only one detector cover should be removed during the procedure of
adding a new detector.
Add Device
In order to add a wireless input, click
. New window will appear, where proper
connection has to be chosen (serial port number to which CPX220NWB is connected to) and
service code has be typed in.
In new window, choose proper connection (serial port number to which CPX220NWB is
connected to) and zone number for new device. Then enter service code and press Read
button.
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
70 / 123
Advertisement
Table of Contents
