Table of Contents
Advertisement
6.8.3.
Events
In order to assign a message to an event, one has to select Event Type, and for that Event
Type in the Message column, select one of the messages defined before. To assign a
number to an event, a corresponding column from Num 1 to Num 10 has to be checked.
From now on, whenever this event occurs, a text containing selected message will be send
to the selected phone numbers. Before sending the message, may occur an additional
attempt a voice call (see item 6.8.4. Options).
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
90 / 123
Advertisement
Table of Contents
