Table of Contents
Advertisement
6.6.1.
Events
6.6.1.1. GPRS ON/OFF
In these columns you can check which signals are to be reported to the monitoring
station via GPRS transmission. You have the option to send information on both,
alarms (change of zone state from idle into active) and returns of zones states from
active into idle (normalisation). In order to transmit a particular signal you have to
check it (by clicking a relevant check box on the right hand side).
Press [Clear] button to remove all checked signals.
Press [Reverse] to reverse the check into the opposite ones.
6.6.1.2. SMS ON/OFF
In these columns you can check which signals are to be reported to the monitoring
station via SMS message – when the equipment is not connected with server via
GPRS connection. You have the option to send information on both, alarms (change
of input state from idle into active) and returns of zone states from active into idle
(normalisation). In order to transmit a particular signal you have to check it (by
clicking a relevant check box on the right hand side).
Press [Clear] button to remove all checked signals.
Press [Reverse] to reverse the check into the opposite ones.
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
82 / 123
Advertisement
Table of Contents
