Table of Contents
Advertisement
ID and serial number will appear. To accept, press
been added in the previously selected row.
User can configure remote controllers, to suit his needs. Remote controller has to be
assinged to one of the previously added users (or administrator) –
buttons can be assigned to the actions of the Alarm Control Unit. In order to assign a button
to the action, one has to select the desired action from the drop-down menu in the
Button
corresponding
have less then 4 buttons, in that case, additional
option selected.
„Alarm" function is triggering an alarm with audible signal.
„Silent alarm" function is triggering an alarm without audible signal.
Alarms from remote control can be generated regardless of whether or not the partition is
armed.
For normal and silent alarm can be sent a message to the monitoring station, depending on
the configuration of the control panel.
The control panel allows you to assign remote control buttons to various functions. It is
possibile to configure different alarm button.
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
column – columns from
NOTE: The selected user number must be activated by the
Administrator. For this user number should be generated an
access code.
Add Device.
New remote controller has
Button 1
Button 4
to
Button
colums should be left with the None
User
column. Controller's
. Remote controller can
77 / 123
Advertisement
Table of Contents
