Table of Contents
Advertisement
9.1.3.2. CPGETUSERID
Format:
Limitations:
Description
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
If the command is sent via open SMS or the configuration does not allow
remote management of users
CPGETUSERS:EFORMAT
If the format of the sent command is incorrect
CPGETUSERID=password
This command only works when sent through an encrypted way and the
option "Allow remote user management" is set to active in the
Configurator. Possible to execution only by ATS.
Verifies the user code specified as an argument of the command – checks
whether
a
user
Password is the password of the user, id is the user number, partitions are
the partitions to which the user is authorized – bit 0 corresponds to the
partition 1 , bit 1 to the patition 2. The command returns:
CPGETUSERID:EOK,id,partitions
If the user with the specified code exists
CPGETUSERID:EPERMISIONS
If the specified password is incorrect
CPGETUSERID:ENOT_ALLOWED
If the command is sent via open SMS or the configuration does not allow
remote management of users
CPGETUSERID:EFORMAT
If the format of the sent command is incorrect
with
the
specified
code
exists.
109 / 123
Advertisement
Table of Contents
