Table of Contents
Advertisement
Description
9.1.3.7. CPSETADMINPASSWORD
Format:
Limitations:
Description
CPX220NWB ALARM CONTROL UNIT – INSTALLER MANUAL
Delete the user. Id is the user number, adminPassword is the system
administrator password. The command returns:
CPDELUSER:EOK,id
If the user is deleted
CPDELUSER:ENOT_EXISTS,id
If the specified user does not exist or after attempt to delete administrator
or installer
CPDELUSER:EPERMISIONS,id
If you can not delete a user because the administrator password is
incorrect
CPDELUSER:ENOT_ALLOWED
If the command is sent via open SMS or the configuration does not allow
remote management of users
CPDELUSER:EFORMAT
If the format of the sent command is incorrect
CPSETADMINPASSWORD=newPassword
This command only works when sent through an encrypted way, you do
not need to know the administrator password (the user id == 0). The
command needs the option"Allow remote user management" to be set
active in the Configurator. Can be executed only by ATS or administrator.
Changes the main user password – the system administrator. The
command is designed to give the ability to remotely restore the password
(by monitoring station employees) if it is forgotten. NewPassword is the
new password of the main user. The command returns:
CPSETADMINPASSWORD:EOK
CPSETADMINPASSWORD:ENOT_ALLOWED
If the command is sent via open SMS or the configuration does not allow
remote management of users
CPSETADMINPASSWORD:ELENGTH
If the new password is too short or too long or does not consist of digits
CPSETADMINPASSWORD: EPERMISIONS
If the password can not be changed because it is already used by another
user. If you type the current administrator password, the command returns
EOK.
113 / 123
Advertisement
Table of Contents
