Technosoft IPS110 Technical Reference page 8

TML_LIB_LabVIEW v2.0 (part no. P091.040.LABVIEW.v20.UM.xxxx) – explains how to
program in LabVIEW a motion application for the Technosoft intelligent drives using
TML_LIB_Labview v2.0 motion control library for PCs. The TML_Lib_LabVIEW
includes over 40 ready-to-run examples.
TML_LIB_S7 (part no. P091.040.S7.UM.xxxx) – explains how to program in a PLC
Siemens series S7-300 or S7-400 a motion application for the Technosoft
intelligent drives using TML_LIB_S7 motion control library. The TML_LIB_S7 library
is IEC61131-3 compatible.
TML_LIB_CJ1 (part no. P091.040.CJ1.UM.xxxx) – explains how to program a PLC
Omron series CJ1 a motion application for the Technosoft intelligent drives using
TML_LIB_CJ1 motion control library for PCs. The TML_LIB_CJ1 library is
IEC61131-3 compatible.
TechnoCAN (part no. P091.063.TechnoCAN.UM.xxxx) – presents TechnoCAN protocol
– an extension of the CANopen communication profile used for TML commands
If you Need Assistance ...
If you want to ...
Visit Technosoft online
Receive general information
or assistance (see Note)
Ask questions about product
operation or report suspected
problems (see Note)
Make suggestions about,
or report errors in
documentation (see Note)
© Technosoft 2007
Contact Technosoft at ...
World Wide Web: http://www.technosoftmotion.com/
World Wide Web: http://www.technosoftmotion.com/
Email: contact@technosoftmotion.com
Fax: (41) 32 732 55 04
Email: hotline@technosoftmotion.com
Mail: Technosoft SA
Buchaux 38
CH-2022 Bevaix, NE
Switzerland
II IPS110 Technical Reference