Technosoft IPS110 Technical Reference page 52

The selection opens 2 setup dialogues: for Motor Setup and for Drive setup through which you
can configure and parameterize a Technosoft drive, plus several predefined control panels
customized for the product selected.
In the Motor setup dialogue you can introduce the data of your motor and the associated
sensors. Data introduction is accompanied by a series of tests having as goal to check the
connections to the drive and/or to determine or validate a part of the motor and sensors
parameters. In the Drive setup dialogue you can configure and parameterize the drive for your
application. In each dialogue you will find a Guideline Assistant, which will guide you through the
whole process of introducing and/or checking your data. Close the Drive setup dialogue with OK
to keep all the changes regarding the motor and the drive setup.
© Technosoft 2007
40 IPS110 Technical Reference