Table of Contents
Advertisement
1. Safety information
Read carefully the information presented in this chapter before carrying out the drive
installation and setup! It is imperative to implement the safety instructions listed
hereunder.
This information is intended to protect you, the drive and the accompanying equipment during the
product operation. Incorrect handling of the drive can lead to personal injury or material damage.
Only qualified personnel may install, setup, operate and maintain the drive. A "qualified person"
has the knowledge and authorization to perform tasks such as transporting, assembling,
installing, commissioning and operating drives.
The following safety symbols are used in this manual:
WARNING!
CAUTION!
CAUTION!
1.1. Warnings
WARNING!
WARNING!
© Technosoft 2007
SIGNALS A DANGER TO THE OPERATOR WHICH MIGHT
CAUSE BODILY INJURY. MAY INCLUDE INSTRUCTIONS
TO PREVENT THIS SITUATION
SIGNALS A DANGER FOR THE DRIVE WHICH MIGHT
DAMAGE THE PRODUCT OR OTHER EQUIPMENT. MAY
INCLUDE INSTRUCTIONS TO AVOID THIS SITUATION
INDICATES AREAS SENSITIVE TO ELECTROSTATIC
DISCHARGES (ESD) WHICH REQUIRE HANDLING IN AN
ESD PROTECTED ENVIRONMENT
THE VOLTAGE USED IN THE DRIVE MIGHT CAUSE
ELECTRICAL SHOCKS. DO NOT TOUCH LIVE PARTS
WHILE THE POWER SUPPLIES ARE ON
TO AVOID ELECTRIC ARCING AND HAZARDS, NEVER
CONNECT / DISCONNECT WIRES FROM THE DRIVE
WHILE THE POWER SUPPLIES ARE ON
1
IPS110 Technical Reference
Advertisement
Table of Contents
