Technosoft IPS110 Technical Reference page 63

5.2.3.3 Setup drive/motor
In the project window left side, select "S Setup", to access the setup data for your application.
Press View/Modify button . This opens 2 setup dialogues: for Motor
Setup and for Drive Setup (same like on EasySetUp) through which you can configure and
parameterize a Technosoft drive. In the Motor setup dialogue you can introduce the data of your
motor and the associated sensors. Data introduction is accompanied by a series of tests having
as goal to check the connections to the drive and/or to determine or validate a part of the motor
and sensors parameters. In the Drive setup dialogue you can configure and parameterize the
drive for your application. In each dialogue you will find a Guideline Assistant, which will guide
you through the whole process of introducing and/or checking your data.
© Technosoft 2007
51 IPS110 Technical Reference