Left Hand Component - Zontes ZT350-VX 2022 Service Manual

7、FRONT FORK COMPONENT
Fig.25 FRONT FORK
COMPONENT
NO. PART NO.
1 1190100-408051 ZT310-VX left rearview mirror (dark gray)
2 Left hand handle rocker arm seat assembly
ZT350-R left counter handle switch(dark gray TFT-
3 1184300-017000
500)
4 1250205-031091 GB70.1M6×30(stainless steel)
5 1184200-141000 ZT310-V1 Left handle switch
6 1244100-041000 ZT250-R left hand rubber sleeve
7 1134300-018000 ZT350-R balance block (aggravated)
8 Left handle rocker arm
9 1244200-046000 ZT310-V clutch cable sheath
Non-standard hexagon socket bolt M6×13-φ8×20
10 1251100-198000
(environmental color)
GB/T6185 hexagonal nylon lock nut M6
11 1251300-073000
(environmental color)
12 1184200-170000 ZT310-V clutch switch
13 1250201-039000
GB818 cross recessed pan head screw M4×12(color Zinc)
PROCEDURE:
●Left rear view mirror, left switch, rocker arm
Remove the clutch line by referring to the "Replace Clutch Line" procedure. Remove the left rear view mirror
⑴, rocker base⑵, left sub switch⑶, bolt⑷, left switch⑸, and rocker arm⑻ by referring to the steps in "Right
Handle Assembly" and "Add Brake Fluid, Adjusting Rocker Arm".
●Left hand rubber sleeve and balance block assembly
Use a blow gun to blow the left hand grip between the rubber sleeve⑹ and the direction handle tube while
moving the rubber sleeve inward until the balance block positioning hole is exposed. Use the tool to press the
convex part at both ends of the elastic piece on the balance block and pull out the balance block assembly⑺.
Use a blow gun and move the outer sleeve to remove the left hand grip⑹.
●Replace the left hand rocker arm and clutch switch
Fix the bolt⑽ with a 5# hexagonal tool, then remove the nut⑾ with a 10# sleeve or a wrench, remove the
bolt⑽ and then remove the left hand rocker arm⑻. First unplug the clutch switch, then remove the bolt⒀
with a Phillips screwdriver and remove the clutch switch⑿. The rotation adjustment nut can adjust the
distance between the rocker arm and the left hand rubber sleeve to adapt to the feel of different drivers.
CAUTION:
● Press during reassembly: the left hand grip rubber sleeve - balance block - switch - left hand rocker arm -
left rear view mirror. Note the triangle symbol on the rocker arm assembly and the half cover seam alignment
switch.
CHK

Left hand component

ADJ
PART NAME QTY
1
1
1
2
1
1
1
1
1
1
1
1
1
85
CAUTION
10N.m