Headlight Assembly 6 - Zontes ZT350-VX 2022 Service Manual

7、FRONT FORK COMPONENT
Fig.17 FRONT FORK
COMPONENT
NO. PART NO.
1 1251900-058000 Mushroom buckle (25mm×25mm×T3.5mm)
2 1244100-002000 ZT250-S Side cover round rubber
3 1274200-279000 ZT310-VX headlight cover left bracket
4 1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
5 1274200-280000 ZT310-VX headlight cover right bracket
6 1250105-138093 GB5789M6×20 (environmental color)
7 1251700-059093 Flanging bushingφ6.4×φ9×8＋φ18×2
8 1240400-007000 HJ125-3 battery holder buffer aprons
9 4024200-065000 ZT310-VX headlight bracket
10 1174200-048000 ZT310-VX headlight
11 1251300-063093 Plywood M6×11×15(color zinc)
12 1224200-008000 ZT310-R cable plastic staple
PROCEDURE:
●Headlight sub-assembly
Mushroom buckle ⑴ The outer sides of the left and right brackets of the headlight cover are respectively
pasted with double-sided tape.Remove 2pcs cable plastic staples⑿ from the headlight bracket.
Remove the cushion rubber ⑵ from the left and right brackets of the headlight cover.
Grasp the left bracket of the head cover (3) and use 4# inner hexagon to remove the 3 bolts ⑷ and then take
it off. Use the same method to remove the right bracket ⑸ of the headlight cover.
Use a 10# sleeve to remove 6 bolts ⑹ respectively, and then separate the headlight bracket ⑼ from the
headlight ⑽ after removing the bushing ⑺.
Remove 6 pieces of cushion rubber ⑻ from the headlight bracket.
Remove 8 pieces of splints ⑾ from the headlight ⑽.
CAUTION:
●You can search "ZT310-VX Headlight Replacement Video" in the assembly video to watch the detailed video
tutorial.The disassembly is the same,only the apperarance of individual parts is different.
●The parts should be protected during the disassembly process to prevent damage to the paint surface.
●When removing the buckle, pay attention to the strength to prevent damage to the buckle.
CHK

Headlight assembly 6

ADJ
PART NAME QTY
4
2
1
6
1
6
6
6
1
1
8
2
77
CAUTION