Table of Contents
Advertisement
CAUTION:
●When assembling the bracket ⑷, do not tighten the bolts ⑶ first, you need to put the rear shock
absorber back into the vehicle and use the rear shock absorber link baffle to locate the bracket position
and then tighten it.
4、REAR WHELL COMPONENT
Fig.15 Rear wheel, swinging
arm component
NO.
PART NO.
1
1274300-069094 ZT350-VX Muffler Front Mounting Stud
2
1251300-057093 Non-standard nut M10×1.5(Dacromet)
3
1250104-006097 GB16674M6×12 (chromed/HH)
ZT310-V engine right cover decorative cover
4
1274200-221000
mounting bracket
GB5187 non-standard bolt M12×1.25×153(10.9
5
1251112-020000
garde/dacromet)
ZT350-VX rear shock lower bracket right
6
4024300-008000
reinforcement plate
7
1274300-074000 ZT350-VX rear shock absorber link bushing (left)
ZT350-VX rear shock-absorbing lower bracket left
8
4024300-007000
reinforcing plate
9
1250305-009091 GB6187.1 M12×1.25(White Zinc)
10
1251100-291000 Non-standard bolt M10×1.5×55(Dacromet)
11
1274300-060000 ZT350-VX rear shock linkage front bushing
GB5187 non-standard bolt M12×1.25×85(10.9
12
1251112-019000
garde/dacromet)
13
1251500-034000 12.3×26×3 gasket
14
1114300-004000 ZT350-VX rear shock absorber
PROCEDURE:
●Rear shock absorber reinforcement plate
Make a mark with a marker first, then hold the bracket ⑷ and remove the bolt ⑶ with an 8# sleeve, and
take off the bracket ⑷.
Use a 14# torx wrench to fix the stud (1), and use a 14# torx wrench to remove the nut (2). Then use a 14#
Torx wrench to remove the stud (1).
Use a 14# sleeve to fix the head of the bolt ⑽, remove the nut (2) with a 14# sleeve, and then remove the
bolt ⑽ after grasping the rear flat fork connecting rod assembly.
Use a 14# sleeve to fix the head of the bolt ⑸ and then use a 17# sleeve to remove the nut ⑼. Disassemble
the left reinforcing plate ⑻, bushing ⑺, right reinforcing plate ⑹ and rear shock absorber assembly.
●Rear shock absorber link assembly
Remove the bushing ⑾, fix the head of the bolt ⑿ with a 14# sleeve, and then remove the nut ⑼ with a 17#
sleeve. Take out the bolts ⑿ and remove the 2 pieces of spacers⒀, the rear shock absorber ⒁ and the rear
shock absorber link assembly.
CHK
Rear shock absorption 2
ADJ
PART NAME
QTY
1
2
1
1
2
1
1
1
3
1
1
1
2
1
37
CAUTION
Advertisement
Table of Contents
